Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Pearland Homeowners
A broken spring turns your garage door into a dead weight. The door won’t lift, the opener strains and grinds, and if the door is stuck open, your home is exposed until it’s fixed. In Pearland’s humid Gulf Coast climate, springs work hard year-round, and when one lets go you usually hear it. Call (844) 956-5614 and we’ll get a technician out the same day in most cases. Our technicians have up to 10 years of experience, and garage doors are the only trade we work in. We diagnose the exact spring type and brand before we touch anything, quote the price up front, and get your door moving again.
What Our Garage Door Spring Repair Service Includes
Every spring job starts with identifying what’s actually in your door: torsion or extension, the wire gauge, the cycle rating, and the brand of the door and opener. We handle all six of the common spring jobs below, and we quote the price before any work starts.
Torsion Spring Replacement
Torsion springs mount on a steel shaft above the door and do the lifting work a motor alone can’t. When one breaks, the door becomes nearly impossible to raise by hand, and running the opener can damage the motor or the door itself. We measure the existing spring, match the wire size and wind count, and replace it with one rated for the weight and cycle life of your specific door.

Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. They’re common on older doors and on many Clopay and Wayne Dalton models. When they fail they can snap with real force, which is why we always pair a replacement with proper containment. We replace them in matched pairs so the door stays balanced.

Broken Spring Repair
Most spring calls are a broken spring: the door slammed down, the opener hums but nothing moves, or you found a coil of wire on the floor. We confirm the break, check whether the other spring is near the end of its life, and replace as needed. If the door is stuck open and your home isn’t secure, we treat it as an emergency and prioritize the call.

Spring Adjustment
A door that drifts up on its own, feels too heavy, or won’t stay closed usually has a tension problem rather than a broken spring. We check the balance, adjust the tension to spec, and re-test the door through its full travel. This is also the right call after a door has been bumped or a track has shifted.
Safety Cable Installation
Extension springs should always run inside a steel safety cable so a broken spring stays contained instead of flying loose. Many older installations skip this. We install cables on any door that’s missing them, which is one of the cheapest safety upgrades you can make.
Spring Inspection
Springs don’t last forever, and they rarely break without warning. A short inspection checks for gaps in the coils, rust, sagging, and an unbalanced door, and tells you how much life is left. If you’ve noticed a new noise or a heavier door, this is where to start.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on Chamberlain and Genie opener systems specifically, which matters because a failing spring puts strain on the opener’s drive and logic board. Knowing how those systems report a fault helps us tell you whether the opener is actually damaged or just responding to a broken spring.
On the door side, we service Clopay and Amarr doors and know where their spring hardware wears out. A Clopay door with a sealed torsion system needs a different approach than a standard setup, and Amarr’s heavier panel weights call for springs matched to the load. Whether you have a Chamberlain, Genie, Clopay, Amarr, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A torsion spring breaking sounds like a firecracker. If you heard it and the door won’t lift, stop using the opener and call us.
- The door feels extremely heavy. A door you can barely lift by hand means the spring has lost tension or failed. Don’t force it, because the opener isn’t built to carry that weight.
- The door won’t stay closed or opens on its own. An unbalanced or over-tensioned spring lets the door drift. This is a sign the spring needs adjustment, not replacement.
- Visible gaps or a stretched coil. A gap in a torsion spring or a permanently stretched extension spring means it’s failed or about to. Replace it before it lets go.
- The opener strains or the door moves unevenly. A grinding or laboring opener often points to a spring problem rather than the motor. We check the spring first so you don’t pay for an opener you didn’t need.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis. We ask what happened, what you heard, and whether the door is stuck open or closed. That tells us whether to treat it as an emergency and what to bring.
- 2
On-site inspection. We check the spring type, wire gauge, wind count, door weight, and balance, and look at the cables, drums, and opener for related damage.
- 3
Written quote. You get the price for the spring and any related parts before we start. No surprises when the invoice arrives.
- 4
Replacement with proper tools. Springs are replaced with winding bars and tension released safely. We match the new spring to the door’s weight so it performs like new.
- 5
Test and balance. We run the door through its full travel, check the balance, test the safety reverse, and make sure the opener isn’t overloading. Then we walk you through what we found.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Pearland?
A typical spring repair in Pearland runs $180 – $340 for one spring, depending on the type, the wire gauge, and whether related parts like cables or drums need attention. That range is for a single spring. Matched pairs are usually replaced together, so a pair costs about twice that range. Cable repair, if it’s needed, runs $130 – $250, and a full garage door repair covering several issues runs $150 – $600.
What affects the price: torsion versus extension springs, the weight and size of the door, whether one or both springs are replaced, and any damage to cables, drums, or the opener. If you’ve noticed a heavier door or a strained motor, ask about it up front so the quote covers everything. The best way to avoid overpaying is to get the written estimate before work starts and confirm what’s included: spring, labor, balance check, and safety test. Our free estimate lays out each line so you know what you’re paying for. Call (844) 956-5614 for an exact quote.
Garage Door Spring Repair Near Pearland – Our Service Area
We serve Pearland and the surrounding communities, including Manvel, Fresno, Iowa Colony, Sienna, and Friendswood. If you’re nearby and need garage door spring repair, call and we’ll confirm availability and timing for your area. For broader garage door service beyond springs, see our Pearland Garage Door Repair Pros page.
Serving Pearland, TX – Our Local Coverage Area
We serve Pearland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Pearland
Garage door spring repair means replacing or adjusting the torsion or extension springs that counterbalance the weight of your door. Those springs do most of the lifting work, so when one fails, the door becomes too heavy for the opener and unsafe to use. We identify the spring type and weight, replace it with a correctly rated spring, and test the door balance afterward.
Most spring repairs are done in about one to two hours once we arrive. Torsion replacements are usually quicker than extension jobs, and paired replacements take a little longer than a single spring. If related parts like cables or drums need attention, we’ll tell you before we start so there are no surprises.
A typical spring repair in Pearland runs $180 – $340 for one spring, and a matched pair costs about twice that. The written estimate sets the final price, and we quote it before any work starts. Call (844) 956-5614 for an exact quote; estimates are free.
Yes. We work on Chamberlain and Genie opener systems specifically, along with Clopay and Amarr doors. A failed spring can strain the opener’s drive, so we check the opener as part of the job. If it’s been damaged, we’ll tell you and quote any repair separately.
Yes. Emergency garage door service is a core part of what we do, including stuck doors, broken springs, and security issues. If your door is stuck open or your home isn’t secure, call and we’ll prioritize the job. Response timing depends on your location and the time of day, so call for current availability.
We stand behind our work, and any warranty terms are explained in your written estimate before work starts. Ask us about coverage when you get the quote so you know exactly what’s covered. If something isn’t right after the repair, call and we’ll make it right.
Clear the area around the door and keep the door closed if it’s safe to do so. Don’t try to force a heavy door or run the opener repeatedly, since that can cause more damage. If the door is stuck open, secure what you can and let us know when you call so we can prioritize it.
Schedule Your Garage Door Spring Repair Service in Pearland Today
A broken spring won’t fix itself, and running the door on a failed spring only causes more damage. Call (844) 956-5614 for same-day service in most cases, a free estimate, and a clear price before work starts. Our technicians have up to 10 years of experience, and garage doors are all we do.
Written by the team at Pearland Garage Door Repair Pros.